Doctorate · Engineering
Doctor of Philosophy (Polymer Engineering)
at Universiti Teknologi Malaysia (UTM) · Johor Bahru & Kuala Lumpur
- Duration
- 3 years
- Tuition
- RM 51,600
- Level
- Doctorate
- Study mode
- Full-time · English
Total listed fees, whole programme
RM 58,201
Compulsory ringgit fees, RM 1,500 of it refundable · Undated fee pages, read on 21 October 2026
See every fee lineOverview
What you need to know
Doctor of Philosophy (Polymer Engineering) is a doctoral programme in Engineering at Universiti Teknologi Malaysia (UTM), Johor Bahru & Kuala Lumpur. It takes 3 years of full-time study, and is taught in English.
According to the official fee schedule for international students (Undated fee pages, read on 21 October 2026), the compulsory fees for the whole programme add up to RM 58,201: RM 51,600 in tuition, RM 5,101 in other fees such as Application Fee, EMGS / Student Pass and Student Pass Renewal, and RM 1,500 in refundable deposits, subject to the conditions in the fee schedule.
One further item is listed but not counted in that total, because it is optional: Accommodation (RM 10,800).
From the fee schedule
Faculty of Chemical and Energy Engineering. By research. Full-time; minimum 3 years (6 semesters), maximum 8 years (according to the faculty page, updated 23 February 2026). Research areas listed: Biopolymers, Fibre-Reinforced Composite, Microwave Processing of Polymers, Modification of Polymer, Plastic–Rubber Blend, Polymer Additive and Adhesive, Polymer Nano Composites, Polymer Synthesis and Characterisation, PVC Technology, Recycling of Plastics Waste, Rheology of Polymer Melts. UTM lists it as "Master / Doctor of Philosophy Field of Research : Polymer Engineering"; the faculty page is headed "Master / Doctor of Philosophy in Polymer Engineering". The Faculty of Chemical and Energy Engineering has no fee row of its own: UTM files it under "Engineering Field", and the faculty's programme pages link "International" fees to the fee page used here. UTM prices a master's as three semesters and a PhD as six; each extra semester is charged in full (per the SPS FAQ). The fee page gives no per-semester rate; SPS circular 4/2016 printed RM 5,747 per research semester and RM 4,497–6,997 for coursework and mixed mode, figures that predate the current totals.Fee structure
Fees, line by line
Every amount below is the total for the whole programme, not per year, as listed in the official fee schedule for international students.
| Fee | Amount |
|---|---|
| Tuition FeeRM 51,600Postgraduate fee page, "Engineering" row, PhD by research (6 semesters), including the RM 2,500 viva: RM 51,600 for the whole programme. | |
| Application FeeRM 450Non-refundable application fee for international applicants, paid online before the application is submitted (per the admission FAQ). The AHIBS FAQ gives USD 50 for its own programmes. | |
| EMGS / Student PassRM 2,047First student pass, per EMGS fee schedule v1.8 for public universities: processing RM 1,600 + 8% tax = RM 1,728; eVAL RM 159 (from the EMGS calculator; 8% on RM 150 would be RM 162); sticker RM 60; i-Kad RM 50; visa up to RM 50, depending on nationality. The medical check is done at UTM's health centre, which publishes no price for it. | |
| Student Pass RenewalRM 860Yearly student pass renewal, RM 430 × 2: EMGS renewal RM 250 + 8% tax = RM 270, sticker RM 60, i-Kad RM 50 and visa up to RM 50 (EMGS fee schedule v1.8). Insurance is listed as a separate fee. Late submission is fined RM 50–150. | |
| Medical InsuranceRM 1,494Medical insurance, compulsory for the student pass and renewed every year: RM 498 × 3 years, the cheapest EMGS package (Etiqa Plan 2). Other EMGS packages cost RM 547–644 a year; UTM does not publish a premium of its own. | |
| Bank Guarantee / Personal BondRefundableRM 1,500Personal bond, refunded when the student pass is cancelled. Immigration rates by nationality: RM 2,000 for Canada, the USA, Colombia, Nigeria and 20 other African states; RM 1,000 for Japan, Korea, Hong Kong and Macao; RM 750 for South Asia, Myanmar and the Philippines; RM 500 for Indonesia; RM 300 for Thailand; RM 200 for Singapore; RM 1,500 for all other nationalities (the amount used here). | |
| Completion Processing FeeRM 250Graduation fee: RM 250 (master's and PhD), set by UTM Rules (Student Financial), Schedule V. Convocation attire is sold separately (RM 700 for diploma and bachelor's graduates, RM 800 for master's, RM 1,000 for PhD). | |
| Total listed feesRM 58,201All compulsory ringgit fees, including RM 1,500 in refundable deposits (conditions in each line's note) | |
| Listed, but not included in the total | |
| AccommodationOptionalRM 10,800Optional, not included in the total. Based on the lowest hostel rent UTM publishes, RM 300 a month (hostels RM 300–600; executive rooms and Scholar's Inn up to RM 1,710), × 36 months = RM 10,800. These are Johor Bahru rates; none are published for Kuala Lumpur. | |
Where the money goes
Compare
Doctorates in Engineering: fees at other universities
The lowest-fee programme at the same level and in the same field at each other university we list, from lowest to highest total listed fees. Length and content differ, so open each one for its details.
| Programme | Duration | Total listed fees |
|---|---|---|
| Doctor of Philosophy (Engineering)MMU2 years | 2 years | RM 19,690 |
| Doctor of Philosophy in EngineeringCity University3 yearsPromo · eligible regions only | 3 years | RM 51,550 |
| PhD in EngineeringUNITEN3 years | 3 years | RM 54,460 |
| Doctor of Philosophy in Engineering (Prior Publication)Taylor's23 months | 23 months | RM 56,241 |
| Doctor of Philosophy (Engineering)Lincoln3 yearsPromotional fee | 3 years | RM 57,200 |
| Doctor of Philosophy (Polymer Engineering)UTM(this programme)3 years | 3 years | RM 58,201 |
| Doctor of Philosophy in EngineeringAPU3 years | 3 years | RM 68,648 |
| Doctor of EngineeringSunway3 years | 3 years | RM 85,217 |
“Promo · eligible regions only”: the tuition is a promotional price open to students from eligible regions only, not to students from the UAE, Qatar, Kuwait or Bahrain; the terms and the published fee are on the programme page. “Promotional fee”: the university's schedule calls the tuition promotional, so confirm the current amount before you apply.
Applying
Documents the university will need
You can start now and add them later; the university needs them to issue your offer letter. Academic entry requirements and the English level are set by the university for each applicant, and our advisors review your qualifications with you before you apply.
- Passport First PageClear colour scan of the bio-data page, valid for at least 18 months.
- Last Academic CertificateHighest qualification completed, in English or with certified translation.
- English Language CertificateIELTS, TOEFL, MUET, PTE or Duolingo, where the program requires one.
- Academic TranscriptFull marks transcript for the last qualification.
- Passport PhotographRecent photo on a white background, to EMGS specification.
- Health DeclarationEMGS pre-arrival medical declaration form.
- Research ProposalProposed research topic and outline, for research degrees and dissertation-based honours years.
Guides for before you apply
More at UTM
Related programmes at the same university
- Doctor of Engineering in Engineering Business ManagementDoctorate · 3 yearsRM 62,805
- Doctor of Engineering Specialization: Construction Technology and ManagementDoctorate · 3 yearsRM 64,201
- Doctor of Engineering Specialization: Process Plant ManagementDoctorate · 3 yearsRM 64,201
- Doctor of Philosophy (Biomedical Engineering)Doctorate · 3 yearsRM 58,201
- Doctor of Philosophy (Bioprocess Engineering)Doctorate · 3 yearsRM 58,201
- Doctor of Philosophy (Chemical Engineering)Doctorate · 3 yearsRM 58,201
FAQ
Questions about this programme
How much does Doctor of Philosophy (Polymer Engineering) at Universiti Teknologi Malaysia (UTM) cost for international students?
How long is Doctor of Philosophy (Polymer Engineering)?
Do the fees include SST?
What documents do I need to apply for Doctor of Philosophy (Polymer Engineering)?
Ready to apply for this programme?
Apply for Doctor of Philosophy (Polymer Engineering) at Universiti Teknologi Malaysia (UTM) in a few minutes, or ask us on WhatsApp first.